PhD Defence • Data Systems • Memory Power Consumption in Main-Memory Database SystemsExport this event to calendar

Monday, November 21, 2022 9:00 AM EST

Please note: This PhD defence will take place online.

Alexey Karyakin, PhD candidate
David R. Cheriton School of Computer Science

Supervisor: Professor Ken Salem

In main-memory database systems, memory can consume a substantial amount of power, comparable to that of the processors. However, existing memory power-saving mechanisms are much less effective than processor power management. Unless the system is almost idle, memory power consumption will be high.

The reason for poor memory power proportionality is that the bulk of memory power consumption is attributable to background power, which is determined by memory power state residency. The memory workload in existing systems is evenly distributed over the memory modules and also in time, which precludes the occurrence of long idle intervals. As a result, deep low-power states, which could significantly reduce background power consumption, are rarely entered.

In this work, we aim to reduce the memory power consumption of main-memory data-base systems. We start by investigating and explaining the patterns of memory power consumption, under various workloads. We then propose two techniques, implemented at the database system level, that skew memory traffic, creating long periods of idleness in a subset of memory modules. This allows those modules to enter low-power states, reducing overall memory power consumption. We prototyped these techniques in DimmStore, an experimental database system.

The first technique is rate-aware data placement, which places data on memory modules according to its access frequency. The background power in the unused or least-used modules is reduced, without affecting background power in the most-used modules. Rate-aware placement saves power and has little performance impact. Under a TPC-C workload, rate-aware placement resulted in memory power savings up to 44%, with a maximum throughput reduction of 10%.

The second technique is memory access gating, which targets background power in less-frequently accessed memory modules by inserting periodic idle intervals. Memory gating reduces power consumption of memory modules for which rate-aware placement alone does not create sufficient idleness to reduce power consumption. With gating, memory accesses to these modules become concentrated outside of the idle intervals, creating the opportunity for low-power state use. However, because it delays memory accesses, memory gating impacts performance. Higher memory power savings and lower performance impact occur in workloads with lower memory access rates. Thus, in the YCSB workload with a medium transaction rate, memory gating reduced memory power by 26%, adding 0.25 ms (30%) of transaction latency, compared to DimmStore without gating. In the more memory intensive TPC-C workload and low to medium transaction rate, gating can save 5% of memory power, adding 1.5 ms (60%) of transaction latency, compared to DimmStore without gating.


To receive the Zoom link for this PhD defence, please e-mail Professor Ken Salem.

Location 
Online PhD defence
200 University Avenue West

Waterloo, ON N2L 3G1
Canada
Event tags 

S M T W T F S
30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
1
2
3
  1. 2024 (100)
    1. April (23)
    2. March (27)
    3. February (25)
    4. January (25)
  2. 2023 (296)
    1. December (20)
    2. November (28)
    3. October (15)
    4. September (25)
    5. August (30)
    6. July (30)
    7. June (22)
    8. May (23)
    9. April (32)
    10. March (31)
    11. February (18)
    12. January (22)
  3. 2022 (245)
  4. 2021 (210)
  5. 2020 (217)
  6. 2019 (255)
  7. 2018 (217)
  8. 2017 (36)
  9. 2016 (21)
  10. 2015 (36)
  11. 2014 (33)
  12. 2013 (23)
  13. 2012 (4)
  14. 2011 (1)
  15. 2010 (1)
  16. 2009 (1)
  17. 2008 (1)