-- MikeGore - 04 Mar 2013

APCUPSD setup and networking notes for Ubuntu

This document contains minimal basic instructions for using a standalone or cluster managed networked UPS. Please See the documentation link for full details.

External documentation

• http://www.apcupsd.com/manual/manual.html
  • Apcupsd is a UPS control system that permits orderly shutdown of your computer in the event of a power failure

Installation

• apt-get install apcupsd

Configuration

Standalone USB UPS

• Make the following changes to /etc/default/apcupsd
  • ISCONFIGURED=yes

• Make the following changes to /etc/apcupsd/apcupsd.conf
  • UPSCABLE usb
  • UPSTYPE usb
  • DEVICE
• Start service
  • service apcupsd start

Network Server

In this example we have two private networks we want to share APC status on

• Make the following changes to /etc/default/apcupsd
  • ISCONFIGURED=yes
• Make the following changes to /etc/apcupsd/apcupsd.conf
  • UPSCABLE usb
  • UPSTYPE usb
  • DEVICE
  • NETSERVER on*
  • NISIP 127.0.0.1 10.0.2.1 192.168.2.1
    • You must always have 127.0.0.1 listed

Network Client

We will listen on the 10.0.2.1 interface example above

• Make the following changes to /etc/default/apcupsd
  • ISCONFIGURED=yes
• Make the following changes to /etc/apcupsd/apcupsd.conf
  • UPSCABLE ether
  • UPSTYPE net
  • DEVICE 10.0.2.1:3551
  • POLLTIME 10
    • Note: Likely want to poll quickly

Running and Testing

Starting service

• service apcupsd start

Configuration and Diagnostics using apctest

• You must stop apcupsd when running tests
  • service apcupsd stop
• Start apctest
  • apctest

apctest Documentation Summary

• You can view and make configuration changes to the UPS with apctest
• See http://www.apcupsd.com/manual/manual.html#apctest
• You have the following options
  1. ) Test kill UPS power
  2. ) Perform self-test
  3. ) Read last self-test result
  4. ) View/Change battery date
  5. ) View manufacturing date
  6. ) View/Change alarm behavior
  7. ) View/Change sensitivity
  8. ) View/Change low transfer voltage
  9. ) View/Change high transfer voltage
  10. ) Perform battery calibration
  11. ) Test alarm
  12. ) View/Change self-test interval Q) Quit

Stopping service

• service apcupsd stop

Getting Status - gives LOTS of detailed information on the UPS state

• service apcupsd status

Email Events

Install an Email App

• sudo apt-get install sendemail

Files to Edit

• In /etc/apcupsd find these files

1. changeme, - notification of a failed battery
2. commok - notification of resumed communication between the UPS and the server
3. commfailure - notification of failed communication between the UPS and the server
4. offbattery - notification of main power loss
5. onbattery - notification that main power has resumed

Edit the Appropriate Config File

• sudo vi /etc/apcupsd/onbattery

cscf-adm@plg5:~$ cat /etc/apcupsd/onbattery 
#!/bin/sh
#
# This shell script if placed in /etc/apcupsd
# will be called by /etc/apcupsd/apccontrol when the UPS
# goes on batteries.
# We send an email message to root to notify him.
#
SYSADMIN=cs-rsg-plg@cs.uwaterloo.ca,gboerke@uwaterloo.ca,lfolland@uwaterloo.ca,pabuhr@uwaterloo.ca,asharji@uwaterloo.ca
APCUPSD_MAIL="/usr/bin/sendemail"

HOSTNAME=`plg5.cs`
MSG="UPS for plg5, plg7 and hops Power Failure !!!"
#
(
   echo "Subject: $MSG"
   echo " "
   echo "Main power to the PLG UPS is off"
   echo " "
   /sbin/apcaccess status
) | $APCUPSD_MAIL -u "$MSG" -f plg5@cs.uwaterloo.ca -t $SYSADMIN -s connect.uwaterloo.ca:25
exit 0

Each of the files are similar in structure. An explanation of the config file:

1. SYSADMIN - a list of email recipients separated by commas
2. APCUPSD_MAIL - the email application. In this example it is "sendemail", but it could be another email app
3. MSG - subject of the emails
4. ( ) - within the parenthesis is the body of the email message. It is executed by the shell before sending, hence code such as "/sbin/apcaccess status" can be executed and the results sent.
5. | $APCUPSD_MAIL -u "$MSG" -f plg5@cs.uwaterloo.ca -t $SYSADMIN -s connect.uwaterloo.ca:25

The last line is parsed as:

1. -u is followed by the subject message
2. -f is the sending email address. Note this is a fake address.
3. -t the recipient list
4. -s the mail server and port