Dell™ PowerEdge™ 2500 Systems Installation and Troubleshooting Guide
Figure2-2. Front-Panel Features
Figure2-3. Back-Panel Features
Figure2-4. Hard-Disk Drive Indicators
Figure2-5. Power Supply Features
Figure5-2. Removing the Front Bezel
Figure5-3. Removing the System Cover
Figure5-6. Removing a Cooling Fan
Figure6-1. System Board Features
Figure6-2. Removing the Front Fan Assembly
Figure6-3. Removing the Back Fan Assembly
Figure6-4. Removing/Replacing a Fan
Figure6-5. Installing an Expansion Card
Figure6-6. Removing and Installing the Cooling Shroud
Figure6-7. Rotating the Cooling Shroud
Figure6-8. Removing and Installing the Power Supply
Figure6-9. Memory Module Sockets
Figure6-10. Installing a Memory Module
Figure6-11. Removing a Memory Module
Figure6-13. Removing the Microprocessor
Figure6-14. Pin-1 Identification
Figure6-15. Installing the Microprocessor
Figure6-16. Installing the Heat-Sink
Figure6-17. Installing the VRM
Figure6-18. Installing the RAID Controller Memory Module
Figure6-19. Installing the RAID Key
Figure6-20. Removing and Installing the RAID Battery
Figure6-21. Installing the Battery
Figure7-1. Removing the Peripheral Bay
Figure7-2. Installing a SCSI Hard-Disk Drive Carrier
Figure7-3. Installing a SCSI Backplane Board Daughter Card
FigureA-2. System Board Jumpers
FigureA-3. Connectors on the SCSI Backplane Board
FigureA-4. Connectors on the Interposer Board