omhelp: Getting Help With CLI Commands
omdiag: Using the Diagnostic Service
omreport: Viewing System Status Using the Instrumentation Service
omreport: Using the Storage Reports
omupdate: Using the Update Service for BIOS, Firmware, and Device Drivers
omconfig: Managing Components Using the Instrumentation Service
omconfig system assetinfo: Editing Cost of Ownership Values
omreport rac: Viewing Remote Access Controller Components
omconfig rac: Managing the Remote Access Controller
Working With CLI Command Results
|
NOTE: A NOTE indicates important information that helps you make better use of your computer. |
 |
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. |
Information in this document is subject to change without notice.
© 2002-2003 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, PowerEdge, and Dell OpenManage are trademarks of Dell Computer Corporation; Microsoft, Windows, MS-DOS, and Windows NT are registered trademarks of Microsoft Corporation; Novell and NetWare are registered trademarks of Novell, Inc.; Intel and Pentium are registered trademarks and Itanium, Intel386, and Xeon are trademarks of Intel Corporation; VESA is a registered trademark of Video Electronic Standards Association; UNIX is a registered trademark of The Open Group in the United States and other countries; OS/2 is a registered trademark of International Business Machines Corporation. Portions of the diagnostics information were reprinted with permission from PC-Doctor, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own.
Initial release: December 2001
Last Revised: 24 February 2003