Dell™ PowerEdge™ Expandable RAID Controller 4/Di User's Guide


PERC 4/Di Features

Configuring PERC 4/Di

RAID BIOS Configuration Utility

Dell Manager

WebBIOS Configuration Utility



The information below is provided by the supplier of the referenced device without independent verification by Dell and is subject to the restrictions and disclaimers noted below.

Information in this document is subject to change without notice.
© 2003 Dell Computer Corporation. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, PowerEdge, and Dell OpenManage are trademarks and DellWare is a registered service mark, of Dell Computer Corporation; MegaRAID is a registered trademark of LSI Logic Corporation; Microsoft, Windows NT, MS-DOS, and Windows, are registered trademarks of Microsoft Corporation; Intel is a registered trademark of Intel Corporation; Novell and NetWare are registered trademarks of Novell, Inc.; ASPI is a registered trademark of Adaptec, Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own.

Restrictions and Disclaimers

The information contained in this document, including all instructions, cautions, and regulatory approvals and certifications, is provided by the supplier and has not been independently verified or tested by Dell. Dell cannot be responsible for damage caused as a result of either following or failing to follow these instructions.

All statements or claims regarding the properties, capabilities, speeds or qualifications of the part referenced in this document are made by the supplier and not by Dell. Dell specifically disclaims knowledge of the accuracy, completeness or substantiation for any such statements. All questions or comments relating to such statements or claims should be directed to the supplier.

Initial release: January 2003
Part Number: 9P170   Rev. A03
Model PERC 4/Di