SpecificationsDell™ PowerEdge™ 1600SC Systems User's Guide
|
Microprocessor | |
|---|---|
Microprocessor type |
up to two Intel® Xeon™ microprocessors with a speed of at least 1.8 GHz |
Front-side bus speed |
at least 400 MHz |
Internal cache |
512-KB level 2 cache |
|
Expansion Bus | |
|---|---|
Bus type |
PCI and PCI-X |
Expansion slots |
two 32-bit, 33-MHz PCI slots (5 V); two 64-bit, 66-MHz PCI slots (3.3 V); two 64-bit, 100-MHz PCI-X slots (3.3 V) |
|
Memory | |
|---|---|
Architecture |
72-bit ECC registered DDR 266 SDRAM |
Memory module sockets |
four |
Memory module capacities |
128, 256, 512 MB, or 1 GB |
Minimum memory capacity |
128 MB |
Maximum memory capacity |
4 GB |
|
Video | |
|---|---|
Video type |
ATI Rage XL video controller; VGA connector |
Video memory |
8 MB |
|
Physical | |
|---|---|
Height |
44.7 cm (17.6 inches) |
Width |
21.8 cm (8.6 inches) |
Depth |
57.41 cm (22.6 inches) |
Weight |
30.4 kg (67 lb), maximum configuration |
|
Environmental | |
|---|---|
Temperature: |
|
Operating |
10° to 35°C (50° to 95°F) |
Storage |
–40° to 65°C (–40° to 149°F) |
Relative humidity: |
|
Operating |
20% to 80% (noncondensing) |
Storage |
5% to 95% (noncondensing) |
Maximum vibration: |
|
Operating |
0.25 G (half-sine wave) at a sweep of 3 to 200 MHz for 15 minutes |
Storage |
0.5 G at 3 to 200 Hz for 15 minutes |
Maximum shock: |
|
Operating |
six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 36 G for up to 2.6 ms |
Storage |
six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for up to 2 ms |
Altitude: |
|
Operating |
–16 to 3048 m (–50 to 10,000 ft) |
Storage |
–16 to 10,668 m (–50 to 35,000 ft) |
NOTE: For the full name of an abbreviation or acronym used in this table, see the "Glossary." |
|