In the Port Settings page, you can specify the default port priority for each port on the switch. All packets entering the switch that are untagged (do not already have a priority value) are tagged with the specified default port priority, and then sorted into the appropriate priority queue at the output port.
This page is set up in table format. For each port listed in the Port column, you can set the default port priority (from 0 to 7) to be assigned to untagged frames received on the port. The default setting for all ports is “0.”
The following is a summary of the equivalent CLI commands for items in the Class of Service/Port Settings web page.
| Command | Usage |
| switchport priority default default-priority-id | Use this command to set a priority for the incoming untagged frames or the priority of frames received by the device connected to the specified interface. (LINK) |
Example
|
(config)#interface ethernet
1/3 |