Example NetWare* Configuration Files for iANS: Intel® Network Adapters User Guide

Here is a series of examples for common configurations of Intel's intermediate driver software, iANS.LAN. These examples use a combination of Intel PRO/1000 and PRO/100 adapters. The intermediate driver uses the same syntax with all Intel server adapters regardless of speed. Therefore you may substitute CE100B for CE1000 and vice versa in any of these examples. The only exception to this is that EtherChannel* keywords are dependent on the connection speed. Use "mode=fec" for 100 Mbps and "mode=gec" for gigabit connections.

Example 1: Two-Adapter Fault Tolerance Team
One Intel PRO/1000 server adapter and one Intel PRO/100 server adapter - Ethernet_802.2 frametype, IPX protocol.
Example 2: Two-Adapter ALB Team
Two Intel PRO/1000 server adapters - Ethernet_II frametype, IP and IPX protocols.
Example 3: Teaming
Two Intel PRO/1000 server adapter GEC team - two frametypes, IP and IPX protocols.
Four Intel PRO/100 server adapters in an IEEE 802.3ad team.
Example 4: One Adapter, Two VLANs
One Intel PRO/1000 server adapter - Ethernet_II frametype, IP protocol.
Example 5: One Adapter, three VLANs
One Intel PRO/100 server adapter - All four frametypes, IPX protocol.
Example 6: Two-Adapter ALB team, Five VLANs
Two Intel PRO/1000 server adapters - Ethernet_II, IP and IPX protocols.
Example 7: Two Teams
One Intel PRO/1000 server adapter and one Intel PRO/100 server adapter FEC team - two frametypes, IP and IPX protocols.
One Intel PRO/100 server adapter, two VLANs - two frametypes, IP and IPX protocols. Also describes forcing the speed and duplex settings.
Example 8: Two-Adapter SFT Team
Two Intel PRO/1000 server adapters - Ethernet_II frametype, IP and IPX protocols.
Example 9: Two-Adapter Multi-Vendor AFT Team
One Intel PRO/1000 server adapter and one third-party adapter - Ethernet_802.2 frametype, IPX protocol

Please read all restrictions and disclaimers.

Back to Contents Page